I've bled the brakes on lots of cars and always been happy with the results.
Was having a look over the car and noticed the master cylinder has a bleed nipple.
I'm happy with my braking performance but when I bled the brakes should I of bled from the master cylinder as well ?
Master cylinder nipple ?
- Atomicandy
- Posts: 194
- Joined: Thu Jan 31, 2013 1:25 pm
- Contact:
Master cylinder nipple ?
Atom 2 300 Orange + Porsche 996TT + Gti
- John Scherrer
- Global Moderator
- Posts: 5124
- Joined: Sat Mar 07, 2009 1:20 pm
- Location: Willington, Bedford UK
- Contact:
Re: Master cylinder nipple ?
On the Atom, I've only read that this was required if you had removed the banjo / pressure sensitive brake light switch.
If the pedal feels good, you're good to go !?
On other cars, when bleeding at the slave cylinders hasn't produced a solid pedal, then a final bleed at the master cylinder has produced the desired result.
Tom - Any advice here?
If the pedal feels good, you're good to go !?
On other cars, when bleeding at the slave cylinders hasn't produced a solid pedal, then a final bleed at the master cylinder has produced the desired result.
Tom - Any advice here?
Atom 3 310 Supercharged (2011), Now Sold
Who is online
Users browsing this forum: No registered users and 6 guests