On track in sweden.
Re: On track in sweden.
On the speedo a 300 will get between 150-155 on the Bedford straight.
Re: On track in sweden.
[quote="Steve"]
On the speedo a 300 will get between 150-155 on the Bedford straight.
[/quote]
Really?? Hmmm.
Fck, didn't think they were that quick.
Cheers, Hedge
On the speedo a 300 will get between 150-155 on the Bedford straight.
[/quote]
Really?? Hmmm.
Fck, didn't think they were that quick.
Cheers, Hedge
Re: On track in sweden.
[quote="John H"]
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
- Bruce Fielding
- Posts: 16320
- Joined: Fri Aug 12, 2005 1:13 pm
- Location: London
- Contact:
Re: On track in sweden.
[quote="benyeats"]
[quote="John H"]
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
[/quote]
My Atom speedo is GPS accurate to 130mph.
[quote="John H"]
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
[/quote]
My Atom speedo is GPS accurate to 130mph.
Ariel Atom Owners Club founder, based in Central London
Re: On track in sweden.
[quote="Bruce Fielding"]
[quote="benyeats"]
[quote="John H"]
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
[/quote]
My Atom speedo is GPS accurate to 130mph.
[/quote]
actually.....mine has just stopped working completely.......how annoying.
Any ideas why that would be?
[quote="benyeats"]
[quote="John H"]
[quote="benyeats"]
You should be able to clear 130 in a 245 fairly easier. On the long straight at Bedford in my mere 120 I have seen 120mph + But acceleration rapidly drops off at speeds above 100 ish
Ben
[/quote]
depending on how fast u get out of the hairpin and how late you brake, you can just nudge 140 in a 220 at Bedford..............I can then get 130-135 before the next hairpin
[/quote]
That sounds about right to me. Will have to mount my GPS on the car next time out to see what speed I am actually hitting 'vs speedometer speed. Has proved accurate at lower speeds but no reason to beleive that at faster speeds, on the other hand with the electronics used accuracy should not depend on speed.
Ben
[/quote]
My Atom speedo is GPS accurate to 130mph.
[/quote]
actually.....mine has just stopped working completely.......how annoying.
Any ideas why that would be?
Re: On track in sweden.
[quote="John H"]
actually.....mine has just stopped working completely.......how annoying.
Any ideas why that would be?
[/quote]
Mine jutters now and again, Mr Toad said at Bedford last time out it might be the magnate on the gearbox thingy!!
Dawsey
actually.....mine has just stopped working completely.......how annoying.
Any ideas why that would be?
[/quote]
Mine jutters now and again, Mr Toad said at Bedford last time out it might be the magnate on the gearbox thingy!!
Dawsey
Re: On track in sweden.
There is a small disc shaped magnet bonded to the inner axle joint at the left hand side of the gearbox. The Hall effect transducer \ sensor that reads the manetic pulse as the axle rotates relies on the magnet being fairly close to the sensor as it passes by. Also, the polarity matters. The sensor will only work wih the magent in one polarity orientation, so don't flip it over. The sensor has a threaded body and a plastic lock nut on eaither side of the plate it rides in.
You can loosen one and then adjust how close \ far away from the magnet the sensor sits, then retighten the lock nuts nuts.
The sensor has to be close enough to measure a pulse as the magnet passes by, but not so close to hit it, make mechanical contact. When it's too far away, you'll see the intermittent reading your seeing. Or no reading at all.
An easy fix.
You can loosen one and then adjust how close \ far away from the magnet the sensor sits, then retighten the lock nuts nuts.
The sensor has to be close enough to measure a pulse as the magnet passes by, but not so close to hit it, make mechanical contact. When it's too far away, you'll see the intermittent reading your seeing. Or no reading at all.
An easy fix.
Last edited by dingo on Fri Aug 28, 2009 4:27 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 2 guests