Ive been asked several times this question so I will fwd this to the forum members.
What is the best way to fix carbon fiber if it needs repair. fenders or tub?
how to fix carbon fiber
Re: how to fix carbon fiber
Hy
there is no easy way to fix it because you will always see it.
Normally you grind/cut out the broken chips or parts and replace it from the back side, then lay a new layer of carbon fabric on the outside (where you see it) put peel ply on it and let it cure.
after the cure grind and paint.
I do lots of carbon fiber parts and will post pictures here this week of some nice parts i made for the Atom.
there is no easy way to fix it because you will always see it.
Normally you grind/cut out the broken chips or parts and replace it from the back side, then lay a new layer of carbon fabric on the outside (where you see it) put peel ply on it and let it cure.
after the cure grind and paint.
I do lots of carbon fiber parts and will post pictures here this week of some nice parts i made for the Atom.
Who is online
Users browsing this forum: No registered users and 5 guests