Brammo Atom Torques

[rfmarz@frontiernet]

Hi Guys. As I just had to replace an upright- and whatever goes alng with this type of surgery, I asked Jacob Ensign from Brammo for a listing of the torque's for most hardware. Jacob has been a most helpful Brammo representative! I am a computer illitrerate so this may not work as well as I would like, but the torques are listed to the right of the text.

Ariel Atom Standard Hardware Build List
Key ITEM
Brammo
PN QTY Size Type
Grade and
Material Finish Detail
TORQUE SPECS
IN FT-LBS
STAINLESS
TORQUE SPECS
IN FT-LBS
STAINLESS
TORQUE SPECS
IN IN-LBS
0 (PT) Power train
1 PT 1 HF-M12-60 9 M12-1.75 x 60 Hex Flange Class 10.9 Zinc 7) Trans to Engine 2) Motor Mount 70
2 PT 2 HF-M12-35 6 M12-1.75 x 35 Hex Flange Class 10.9 Zinc Motor Mount 70
3 PT 3 HF-M10-45 5 M10-1.5 x 45 Hex Flange Class 10.9 Zinc 2) Starter to Bell housing, 3) IDS 45
4 PT 4 HF-M8-100 3 M8-1.25 x 100 Hex Flange Class 10.9 Zinc Alternator to Block 16
5 PT 5 SH-3F-4 4 10-32 x 1/2 SHCS Zinc Shift Cable Tombstones
6 PT 6 HB-M10-20 1 M10-1.5 x 20 Hex Class 8.8 Zinc Shift Cable Reaction Bracket 40
7
8
9 (EC) Engine to Chassis
10 EC 1
11 EC 2 HF-8F-24 4 1/2-13 x 2 1/2 Hex Flange Grade 5 Steel Zinc Motor Mount to Chassis Tab 70
12 EC 3 NY-8C 4 1/2-13 Full Nyloc Flange Grade 5 Steel Zinc Motor Mount to Chassis Tab
13 EC 4 WA-8Lc 4 1/2 Thin Washer AN Thin Cres None Motor Mount to Chassis Tab
14 EC 5 WS-M14 1 M14 Washer SAE Steel Zinc Crankshaft pulley for dry sump
15 (FS) Fuel Tank and Shield
16 FS 1 HB-5C-4 2 5/16-18 x1/2 Hex Grade 5 Steel Zinc Hanger Bolts 19
17 FS 2 HB-4F-5 4 1/4-28 x 5/8 Hex Grade 5 Steel Zinc Shield to Tub 10 8 94
18 FS 3 WS-5c 2 5/16 Washer SAE Cres None Hanger Bolt Washer
19 FS 4 WS-4c 4 1/4 Washer SAE Cres None Shield to Tub Washer
20 FS 5 NY-4F 4 1/4-28 Full Nyloc Grade 5 Steel Zinc Shield to Tub Nyloc
21 FS 6 PH-3F-5c 22 10-32 x 5/8 PHCS Cres None Self sealing fuel tank screws
22 FS 7 RV-6-7 4 3/16 x 3/8 Flush Solid Rivet Alum 2117 Cad Nut Plate Retainer
23 (AC) Heat Exchanger
24 AC 1 PH-3F-7 4 10-32 x 7/8 PHCS Grade 5 Steel Zinc Mounting Tabs
25 AC 2 WS-5c 4 5/16 Washer SAE Cres None Mounting Tabs
26 AC 3 WS-3c 4 # 10 Washer SAE Cres None Mounting Tabs
27 AC 4 NY-3F 4 10-32 Full Nyloc Grade 5 Steel Zinc Mounting Tabs
28 (RA) Radiator Attach
29 RA 1 NY-4C 4 1/4-20 Full Nyloc Grade 5 Steel Zinc Rubber Isolators 10
30 RA 2 WS-4c 8 1/4 Washer SAE Cres Zinc Rubber Isolators
31 RA 3 NY-4C-L 4 1/4-20 Thin Nyloc Grade 5 Steel Zinc Rubber Isolators To Chassis
32 (DP) Dampers
33 DP 1 SH-6C-16 4 3/8-16 x 2.0 SHCS Grade 5 Steel Zinc Chassis Shock Mount 33
34 DP 2 NY-6C 4 3/8-16 Full Nylon Grade 5 Steel Zinc Chassis Shock Mount
35 DP 3 WS-6c 8 3/8 Washer AN Cres None Chassis Shock Mount
36 (SP) Suspension
37 SP 1 SH-8C-24 12 1/2-13 x 2 1/2 SHCS Grade 5 Steel Zinc Chassis to Wishbone 70
38 SP 2 WA-8Lc 32 1/2 Thin Washer AN Thin Cres None Chassis to Wishbone
39 SP 3 NY-8C 14 1/2-13 Full Nyloc Grade 5 Steel Zinc Chassis to Wishbone
10/5/2007 Ariel Torque Specs.xls
Ariel Atom Standard Hardware Build List
40 SP 4 SH-8C-22 2 1/2-13 x 2 1/4 SHCS Grade 5 Steel Zinc Chassis to Wishbone Frt Lower 70
41 SP 5 HB-8C-24 2 1/2-13 x 2 1/2 Hex Grade 5 Steel Zinc Chassis to Wishbone Rack Local. 70
42 SP 6 NY-8CL 2 1/2-13 Thin Nyloc Grade 5 Steel Zinc Chassis to Wishbone Frt Lower
43 SP 7 NT-10FL 6 5/8-18 Thin LH Nut LH Grade 5 Steel Zinc Rod End to Thimble Check Nut 50
44 SP 8 Brammo Mfg 6 7/8-18 Thin Nut Grade 5 Steel Zinc Thimble Check Nut 50
45 SP 9 AN6-14A 4 3/8-24 x 1 1/2 AN Hex Steel Cad Wish Bone to Pushrod 33 22 259
46 SP 10 NY-6F 4 3/8-24 Full Nyloc Grade 5 Steel Zinc Wish Bone to Pushrod
47 SP 11 WA-6c 4 3/8 Washer AN Cres None Wish Bone to Pushrod
48 (BC) Bellcrank
49 BC 1 HB-4F-5 4 1/4-28 x 5/8 Hex Grade 5 Steel Zinc Retaining Cap to Pin 10
50 BC 2 WS-4c 4 1/4 Washer SAE Cres None Retaining Cap to Pin
51 BC 3 AN6-14A 8 3/8-24 x 1 1/2 AN Hex Steel Cad Bellcrank to Pushrod 33 22 259
52 BC 4 NY-6F 8 3/8-24 Full Nyloc Grade 5 Steel Zinc Bellcrank to Pushrod
53 BC 5 WA-6c 16 3/8 Washer AN Cres None Bellcrank to Pushrod
54 BC 6 SP-6-10-2c 8 3/8 x 5/8 x .125 Spacer Cres None Bellcrank to Pushrod
55 (PR) Push Rods
56 PR 1 NH-6FL 4 3/8-24 Thin Nut Grade 5 Steel Zinc Rod End Check Nut 25
57 PR 2 NH-6FL (LH) 4 3/8-24 Thin LH Nut LH Grade 5 Steel Zinc Rod End Check Nut (left hand) 25
58 (TR) Steering Tie Rods
59 TR 1 NH-6FL 2 3/8-24 Thin Nut Grade 5 Steel Zinc Rod End Check Nut 25
60 TR 2 NH-6FL (LH) 2 3/8-24 Thin LH Nut LH Grade 5 Steel Zinc Rod End Check Nut (left hand) 25
61 (UP) Uprights
62 UP 1 HB-10F-34 2 5/8-18 x 3 1/2 Hex Grade 8 Steel Ultra Coat Frt Spindle Retaining Bolt 180 use this spec for
63 UP 2 WS-10c 2 5/8 Washer SAE Cres None Frt Spindle Retaining Bolt rear axle also
64 UP 3 NY-10F 2 5/8-18 Full Nyloc Grade 8 Steel Zinc Frt Spindle Retaining Bolt
65 UP 4 AN6-13A 2 3/8-24 x 1 3/8 AN Hex Steel Cad Frt Lower Ball Joint to Upright 33 22 259
66 UP 5 NY-6F 4 3/8-24 Full Nyloc Grade 5 Steel Zinc Frt Lower Ball Joint to Upright
67 UP 6 WA-6c 8 3/8 Washer AN Cres None Frt Lower Ball Joint to Upright
68 UP 7 AN6-22A 2 3/8-24 x 2 1/4 AN Hex Steel Cad Tie Rod to Steering Arm 33
69 UP 8 SH-10F-14H 8 5/8-18 X 1 1/2 SHCS Grade 5 Steel Zinc Upright to Upper Rod End 100
70 UP 9 RN-6C-1 4 3/8-16 x .125 Rivet Nut Steel Zinc Fender Bracket Mount 20-30
71 UP 10 HB-6C-10 4 3/8-16 x 1.0 Hex Grade 5 Steel Zinc Fender Bracket Mount 20-30
72 UP 11 WS-6c 4 3/8 Washer SAE Cres Zinc Fender Bracket Mount
73 UP 12 WS-13 2 13/16 Washer SAE Grade 8 Steel Zinc Spindle Washer
74 UP 13 RN-6C-1 4 3/8-16 Rivnut Rivet Nut Steel Zinc Fender Bracket Mount
75 UP 14 SP-10-1c 4 5/8 x 7/8 x .060 Spacer Cres None Upper Rod End Spacer
76 UP 15 HB-6F-10 4 3/8-24 x 1.0 Hex Grade 5 Steel Zinc Fender Mount, Mr. Parker 33
76 (SA) Shifter Assembly
77 SA 1 PH-3F-5 8 10-32 x 5/8 PHCS Grade 5 Steel Zinc Tunnel Box to Chassis
78 SA 2 WS-3c 8 # 10 Washer SAE Cres None Tunnel Box to Chassis
79 SA 3 SH-4C-10 4 1/4-20 x 1.0 SHCS Grade 5 Steel Zinc Shifter to Tunnel Box
80 SA 4 RV-4-4 14 1/8 x 1/4 solid Flush Alum 2117 Cad Tunnel Box Rivets
10/5/2007 Ariel Torque Specs.xls
Ariel Atom Standard Hardware Build List
81 SA 5 NP-4 4 1/4-20 Pem Pem Nut Steel Zinc Tunnel Box Rivets
82 (RP) Rack and Pinion
83 RP 1 AN6-16A 2 3/8-24 x 1 3/4 AN Hex Steel Cad Fork Ends thru Rod End 33 22 259
84 RP 2 NY-6F 2 3/8-24 Full Nyloc Grade 5 Steel Zinc Fork Ends thru Rod End
85 RP 3 WA-6c 2 3/8 Washer AN Steel Cad Fork Ends thru Rod End
86 RP 4 SP-6-10-2c 4 3/8 x 5/8 x .125 Spacer Cres None Fork Ends thru Rod End 33
87 RP 5 HB-6C-6 4 3/8-16 x 3/4 Hex Grade 5 Steel Zinc Rack Mt Blocks to Chassis 33
88 RP 6 WA-6c 4 3/8 Washer AN Steel Cad Rack Mt Blocks to Chassis
89 (SC) Steering Column
90 SC 1 HB-5F-6 4 5/16-24 x 3/4 Hex Grade 5 Steel Zinc Column Flange 19 12 142
91 SC 2 NY-5F 4 5/16-24 Full Nyloc Grade 5 Steel Zinc Column Flange
92 SC 3 WS-5c 8 5/16 Washer SAE Cres Zinc Column Flange
93 SC 4 HB-4F-6 10 1/4-28 x 3/4 Hex Grade 5 Steel Zinc Reservoir to Bracket to Chassis 10 8 94
94 SC 5 NY-4F 10 1/4-28 Full Nyloc Grade 5 Steel Zinc Reservoir to Bracket to Chassis
95 SC 6 WS-4c 10 1/4 Washer SAE Cres None Reservoir to Bracket to Chassis
96 SC 7 HB-4F-6 10 1/4-28 x 3/4 Hex Grade 5 Steel Zinc Reservoir to Bracket to Chassis 10 8 94
97 SC 8 BH-5C-5 3 5/16-18 x 5/8 BHCS Grade 5 Steel Zinc Steering Wheel Attach 19 11 132
98 (PA) Pedal Assembly
99 PA 1 HB-5F-12 4 5/16-24 x 1 1/4 Hex Grade 5 Steel Zinc Pedal Assm to Chassis 19 12 142
100 PA 2 NY-5F 4 5/16-24 Full Nyloc Grade 5 Steel Zinc Pedal Assm to Chassis
101 PA 3 WS-5c 4 5/16 Washer SAE Cres Zinc Pedal Assm to Chassis
102 PA 4 HB-4F-20 3 1/4-28 x 2.0 Hex Grade 5 Steel Zinc ETC to Chassis (throttle) 10 8 94
103 PA 5 NY-4F 3 1/4-28 Full Nyloc Grade 5 Steel Zinc ETC to Chassis (throttle)
104 PA 6 WS-4c 3 1/4 Washer SAE Cres None ETC to Chassis (throttle)
105 PA 7 NY-2F 1 8-32 Full Nyloc Grade 5 Steel Zinc Clutch Bumper
106 TK 14 FH-M6-10 8 M6-1.0 x 10 FHCS Grade 5 Steel Zinc Hat to Spindle Flange 8
107 (BX) Brake Option (Basic) PBR Front, PBR Rear
108 BX 1 SH-M14-40 4 M14-2.0 x 40 SHCS Class 10.9 Zinc PBR Caliper to Front Upright 117
109 BX 2 WA-M14c 4 M14 Washer AN Cres None PBR Caliper to Front Upright
110 BX 3 SP-M14 10 M14 x .2mm Spacer Class 10.9 Zinc Brake Shim Spacer
111 BX 4 HB-6F-40 4 3/8-24 x 4.0 Hex Grade 5 Steel Zinc Rear Cross Bolts 33 22 259
112 BX 5 WA-6c 4 3/8 Washer AN Cres None Rear Cross Bolts
113 BX 6 SH-M12-25 4 M12-1.75 x 25 SHCS Class 10.9 Zinc Rear PBR to Bracket 70
114 BX 7 FH-M6-10 8 M6-1.0 x 10 FHCS Grade 5 Steel Zinc Hat to Spindle Flange 8
115 (SX) Brake Option (Sport) Wilwood Dynalite Front, PBR Rear
116 SX 1 SH-M14-40 4 M14-2.0 x 40 SHCS Class 10.9 Zinc Bracket to Front Upright 117
117 SX 2 WA-M14c 4 M14 Washer AN Cres None Bracket to Front Upright
118 SX 3 SP-M14 10 M14 x .2mm Spacer Class 10.9 Zinc Brake Shim Spacer
119 SX 4 SH-M10-50 4 M10-1.5 x 50 SHCS Class 10.9 Zinc Front Wilwood to Bracket 45
120 SX 5 NY-M10 4 M10-1.5 Full Nyloc Class 10.9 Zinc Front Wilwood to Bracket
121 SX 6 WA-M10c 4 M10 Washer AN Cres Zinc Front Wilwood to Bracket
122 SX 7 HB-6F-40 4 3/8-24 x 4.0 Hex Grade 5 Steel Zinc Rear Cross Bolts 33 22 259
123 SX 8 WA-6c 4 3/8 Washer AN Cres Zinc Rear Cross Bolts
10/5/2007 Ariel Torque Specs.xls

Ariel Atom Standard Hardware Build List
124 SX 9 SH-M12-25 4 M12-1.75 x 25 SHCS Class 10.9 Zinc Rear PBR to Bracket 70
125 SX 10 FH-M6-10 8 M6-1.0 x 10 FHCS Grade 5 Steel Zinc Hat to Spindle Flange 8
126 (TK) Brake Option (Track) Wilwood Dynalite Front, Wilwood Powerlite Rear w/ Mr Parker
127 TK 1 SH-M14-40 4 M14-2.0 x 40 SHCS Class 10.9 Zinc Bracket to Front Upright 117
128 TK 2 WA-M14c 4 M14 Washer AN Cres None Bracket to Front Upright
129 TK 3 SP-M14 10 M14 x .2mm Spacer Class 10.9 Zinc Brake Shim Spacer
130 TK 4 SH-M10-45 4 M10-1.50 x 45 SHCS Class 10.9 Zinc Front Wilwood to Bracket 45
131 TK 5 NY-M10 4 M10-1.5 Full Nyloc Class 10.9 Zinc Front Wilwood to Bracket
132 TK 6 WA-M10c 4 M10 Washer AN Cres None Front Wilwood to Bracket
133 TK 7 HB-6F-44 4 3/8-24 x 4 1/2 Hex Grade 5 Steel Zinc Rear Cross Bolts 33 22 259
134 TK 8 WA-6c 4 3/8 Washer AN Cres None Rear Cross Bolts
135 TK 9 SH-M10-55 4 M10-1.5 x 55 SHCS Class 10.9 Zinc Rear Wilwood to Bracket 45
136 TK 10 WA-M10c 4 M10 Washer AN Cres Zinc Rear Wilwood to Bracket
137 TK 11 NY-6F 4 3/8-24 Full Nyloc Grade 5 Steel Zinc Rear Cross Bolts 33
138 TK 12 NL-5F 24 5/16-24 Lock Lock Nut Grade 5 Steel Zinc Rotor to Hat
139 TK 13 SH-5F-7 24 5/16-24 x 7/8 SHCS Grade 5 Steel Zinc Rotor to Hat 19
140 TK 14 FH-M6-10 8 M6-1.0 x 10 FHCS Grade 5 Steel Zinc Hat to Spindle Flange 8
141 (RX) Brake Option (Race) Alcon 4 pot Front, Alcon 2 pot Rear w/ Mr Parker
142 RX 1 SH-M14-40 4 M14-2.0 x 40 SHCS Class 10.9 Zinc Bracket to Front Upright 117
143 RX 2 WA-M14c 4 M14 Washer AN Cres None Bracket to Front Upright
144 RX 3 SP-M14 10 M14 x .2mm Spacer Class 10.9 Zinc Brake Shim Spacer
145 RX 4 SH-M10-55 4 M10-1.5 x 55 SHCS Class 10.9 Zinc Front Alcon to Bracket 45
146 RX 5 WA-M10c 4 M10 Washer AN Cres None Front Alcon to Bracket
147 RX 6 HB-6F-44 4 3/8-24 x 4 1/2 Hex Grade 5 Steel Zinc Rear Cross Bolts 33
148 RX 7 WA-6c 4 3/8 Washer AN Cres None Rear Cross Bolts
149 RX 8 SH-M10-55 4 M10-1.5 x 55 SHCS Class 10.9 Zinc Rear Alcon to Bracket 45
150 RX 9 WA-M10c 4 M10 Washer AN Cres None Rear Alcon to Bracket
151 RX 10 NY-6F 4 3/8-24 Full Nyloc Grade 5 Steel Zinc Rear Cross Bolts 33
152 RX 11 NL-5F 24 5/16-24 Lock Lock Nut Grade 5 Steel Zinc Rotor to Hat
153 RX 12 SH-5F-7 24 5/16-24 x 7/8 SHCS Grade 5 Steel Zinc Rotor to Hat 19
154 RX 13 FH-M6-10 8 M6-1.0 x 10 FHCS Grade 5 Steel Zinc Hat to Spindle Flange 8
155 (SA) Recaro Seat Assembly and Belts
156 SA 1 HF-M8-20 8 M8-1.25 x 20 Hex Flange Class 10.10 Zinc Recaro Seat to Adapter Bracket 22
157 SA 2 FH-4F-3 4 1/4-28 x 1/2 FHCS Grade 5 Steel Zinc Rail to Seat Bracket (rear) 10
158 SA 3 NY-4FT 34 1/4-28 Half Nyloc Grade 5 Steel Zinc All Over 10
159 SA 4 HB-4F-4 28 1/4-28 x 1/2 Hex Grade 5 Steel Zinc Rail to Seat Bracket 10
160 SA 5 NY-7F 2 7/16-20 Full Nyloc Grade 5 Steel Zinc Harness Nuts 54
161 SA 7 RN-4C-1 10 1/4-20 x .150 Rivet Nut Steel Gold Zinc 1/4-20 Knurled Rivnut .150 Grip Steel
162 SA 8 SH-4C-6 12 1/4-20 x 3/4 SHCS Grade 5 Steel Zinc Seat Rail Assm to Chassis 10
163 SA 9 WS-4c 8 1/4 Washer SAE Cres None All Over
164 SA 10 WA-4c 4 1/4 Washer AN Cres None All Over
165 SA 12 HB-4F-5 2 1/4-28 x 5/8 Hex Grade 5 Steel Zinc Recaro Seat Adapter to Rail 10
166 (BA) Bench Seat Assembly
10/5/2007 Ariel Torque Specs.xls
Ariel Atom Standard Hardware Build List
167 BA1 SH-6C-10 4 3/8-16 x 1.0 SHCS Grade 5 Steel Zinc Bench Seat to Chassis 33
168 BA2 WA-6c 4 3/8 Washer AN Cres None Bench Seat to Chassis
169 BA3
170 (TA) Tub Attach
171 TA 1 RB-6-6 32 .187 x .375 SS Rivet Closed End None Tub Perimeter
172 TA 2 HB-4F-5 4 1/4-28 x 5/8 Hex Grade 5 Steel Zinc Tunel to Chassis
173 TA 3 NY-4F 4 1/4-28 Full Nyloc Grade 5 Steel Zinc Tunel to Chassis
174 TA 4 WF-4 4 1/4 Washer Med Fender Grade 5 Steel Zinc Tunel to Chassis
175 (BW) Body Work
176 BW 1 RN-3F-1 12 10-32 x .125 Rivet Nut Steel Zinc Chassis Rivnuts
177 BW 2 RN-3F-2 2 10-32 x .250 Rivet Nut Steel Zinc Chassis Rivnuts
178 BW 3 BH-3F-5c 14 10-32 x 5/8 BHCS Cres None Body Screws
179 BW 4 BH-3F-6c 2 10-32 x 3/4 BHCS Cres None Body Screws
180 BW 5 RB-4F-6 11 1/8 x 3/16 Blind Flush Rivet Cres None Plate nut retaining rivets
181 BW 6 RB-4F-8 11 1/8 x 1/4 Blind Flush Rivet Cres None Plate nut retaining rivets
182 BW7 NY-M10F 2 M10-1.25 Full Nyloc Class 8 Zinc Mirror Nyloc
183 BW8 PH-#8-6c 1 #8 x 3/4" Sheetmetal Cres None Snorkel Bolt Down
184 BW9 HB-4C-5 1 1/4-20 x 5/8" Hex Grade 5 Steel Zinc Battery Box
185 BW10 NH-4C 2 1/4-20 Half Half Nut Grade 2 Steel Zinc Battery Box
186 (EX) Exhaust
187 EX1 HB-6F-14 9 3/8-24 x 1 1/2 Hex Grade 5 Steel Zinc 3-Bolt Exhaust Flanges 33
188 EX2 NL-6F 9 3/8-24 Lock Lock Nut Grade 5 Steel Cad 3-Bolt Exhaust Flanges
189 EX3 HB-5F-12 3 5/16-24 x 1 1/4 Hex Grade 5 Steel Zinc Muffler Hanger to Chassis 19
190 EX4 NL-5F 3 5/16-24 Lock Lock Nut Grade 5 Steel Zinc Muffler Hanger to Chassis
191 EX5 HB-M8-18 3 M8-1.25 x 18 Hex Class 8.8 Zinc Header Shield to Block 22
192 EX6 WS-M8 3 M8 Washer Washer Cres None Header Shield to Block
193 (LT) Lighting
194 LT1 SH-2F-4 24 8-32 x 1/2 SHCS Cres None Light Housing to Light Stalk
195 LT2 NY-2F 24 8-32 Full Nyloc Grade 5 Steel Zinc Light Housing to Light Stalk
196 LT3 BH-3F-4c 4 10-32 x 1/2 BHCS Cres None Rear Light Cover
197 LT4 SH-3F-24 4 10-32 x 2 1/2 SHCS Cres None Rear Light Cover
198 LT5 NY-3F 4 10-32 Full Nyloc Grade 5 Steel Zinc Rear Light Cover
199 LT6 WS-3c 8 # 10 Washer SAE Cres None Rear Light Cover
200 (EN) Engine Fasteners
201 EN1 HF-M8-20 1 M8-1.25 x 20 Hex Flange Class 10.10 Zinc Chassis to Engine Ground 22
202 EN2 SH-M6-35 2 M6-1.0 x 35 SHCS Class 12.9 Blue Starter Mount 8
203 EN3 SH-M10-20 2 M10-1.5 x 20mm SHCS Class 12.9 Blue Reaction Bracket 45
204 EN4 NT-M6 1 M6-1.0 Nut Tooth Nut Class 5 Zinc Engine Ground
205 EN5 HB-M6-20 2 M6-1.0 x 20mm Hex Class 8.8 Zinc Heat Exchanger 8
10/5/2007 Ariel Torque Specs.xls

[bolus]

cool!  I tried to get the whole list out of them before but never could.  Was this in excel format?  Because I can create a table out of it if you email it to me.

[DarthChicken]

Sticky this thread!

[Karl]

This... is... awesome... 

[bolus]

come on rfmarz, send me the excel doc and I'll put it into a nice table format.  This is basically data on every bolt on the car.  This is a huge resource that you scored!!

[slowcharles]

Just what I needed- but an excel table would be even better 

[rfmarz@frontiernet]

bolus, I'll send the document when I get home. I'm at Roebling Road racing my kart this weekend and I can't email out. I'll get it to you soon. I tried to do what you want to do but, I'm SUCH a computer illiterate!

[Driver]

Consider it 'stuck'.   if Bolus will do the Tables I'll see they get put in the first post.

[quote="DarthChicken"]
Sticky this thread![/quote]

[rfmarz@frontiernet]

I'll get the excel document to bolus on Monday.

[bolus]

[Driver]

rfmarz, Bolus could you send me the pdf if you would?

Thanks

[bolus]

pdf

[Driver]

OK, I've sent them to you in email as edited PNG images. Reduced colors, higher res, better print quality & faster download times should result.  Should be able to slide them right in place of the jpegs without the extra white space all around forcing the text to be even smaller.

[rfmarz@frontiernet]

How can we print a nice table version that we can laminate?

[bolus]

You should be able to just print the PDF which is the best copy.  Or put it on a disc and bring it to kinko's and have them do it