Tired of brake fluid leaks from your Wilwood reservoirs? Simple,easy fix!

[SloanZurnToto]

Thanks Terry.
Yes it is a Brammo Atom2.
Can you access the bleeder screw without taking out the firewall?
Is the procedure to bleed this to pump the clutch pedal a few times, then keep it held down with a 2x4 and then crack open the bleeder screw?

[Terry Kennedy]

Yes it is a Brammo Atom2.
Can you access the bleeder screw without taking out the firewall?

Yes. It's up in there, but the right-sized metric open end wrench will work fine.

Is the procedure to bleed this to pump the clutch pedal a few times, then keep it held down with a 2x4 and then crack open the bleeder screw?

I've generally either used a pressure bleeder or someone to pump the clutch for me, but you system should work as long as the pedal doesn't release at all when you wedge it.

[Karl]

[quote="Terry Kennedy"]
[...]
I've generally either used a pressure bleeder or someone to pump the clutch for me, but you system should work as long as the pedal doesn't release at all when you wedge it.
[/quote]

Exercise extreme caution when using a pressure bleeder with the small Wilwood reservoirs; they can pop off easily if pressurized.