Dashed Dash2

[Winmoz]

Following my last track session when the car “alarmed” a for (probably) high water temp, I was hoping that I could interrogate the ECU and see what parameter was breached.
Do I have to in-mount the Dash 2 or is there a cunning serial connector squirrelled away somewhere?
Any ideas?

Thanks,
Steve

[John Scherrer]

There should be an OBD port mounted under the ECU I think ..

[stupot]

There is a connector behind the dash. You may see it from underneath or from the side. I noticed it when I removed the top panel to get to the brake fluid reservoirs.

[Winmoz]

Thanks chaps. I’ll have a proper look in the week.

[John Scherrer]

.. or is that the power for the windscreen option?

[stupot]

There may be but there is a definitely a serial port connector on a short lead tucked up behind the dash.