ECU /relay box wiring diagram
ECU /relay box wiring diagram
Hi,
i have buyed a Atom2 (k20a2+rotrex) last year.
Because of a cheap/bad fuel filter the engine is damaged (low compression on 1. cylinder).
I have a spare k20a2 from a civic with PRA ecu and PRA engine loom.
So i decided to pull out the engine and the hydra nemesis ecu and convert to not charged for now.
Next year i will upgrade the ecu to hondata v4 pro and a fresh engine back to the rotrex setup.
To go back to honda ecu i need some wiring info for the E-Plug on the PRA-ECU,the 101? plug from the engine loom, and the Ariel fuse/relais box. Could somebody help out?
Picture with ecu and engine loom attached
[img width=1024 height=768]http://img661.imageshack.us/img661/4663/4EdNN1.jpg[/img]
[img width=1024 height=768]http://img909.imageshack.us/img909/5017/D5eEiV.jpg[/img]
i have buyed a Atom2 (k20a2+rotrex) last year.
Because of a cheap/bad fuel filter the engine is damaged (low compression on 1. cylinder).
I have a spare k20a2 from a civic with PRA ecu and PRA engine loom.
So i decided to pull out the engine and the hydra nemesis ecu and convert to not charged for now.
Next year i will upgrade the ecu to hondata v4 pro and a fresh engine back to the rotrex setup.
To go back to honda ecu i need some wiring info for the E-Plug on the PRA-ECU,the 101? plug from the engine loom, and the Ariel fuse/relais box. Could somebody help out?
Picture with ecu and engine loom attached
[img width=1024 height=768]http://img661.imageshack.us/img661/4663/4EdNN1.jpg[/img]
[img width=1024 height=768]http://img909.imageshack.us/img909/5017/D5eEiV.jpg[/img]
Re: ECU /relay box wiring diagram
Google Honda Database 2.0.7
There is a phone app with most of the data you require I believe. I have it on my phone but there is too much data - you are best having a look yourself - hope it helps.
Stew
There is a phone app with most of the data you require I believe. I have it on my phone but there is too much data - you are best having a look yourself - hope it helps.
Stew
Last edited by AtomMadStew on Sat Jun 20, 2015 9:56 pm, edited 1 time in total.
Re: ECU /relay box wiring diagram
Thanks, i tried the app but ther is no info about the PRA ecu and nothing about the plug of the engine loom
Re: ECU /relay box wiring diagram
See tech section - ecu pin outs
Doesn't say what ecu but does have some pin out data.
What car/year is a PRA ecu from?
Might be able to drag some wiring diagrams off my Honda.net
Doesn't say what ecu but does have some pin out data.
What car/year is a PRA ecu from?
Might be able to drag some wiring diagrams off my Honda.net
Re: ECU /relay box wiring diagram
civic ep3 (european).The pinout in tech section of the app are from different ecu's. PRA ist odbII i think.
Re: ECU /relay box wiring diagram
ep3 2003 - is this of any help?
directly off official hondacom MARIS.
doesn't show pinout numbers - but by wire colours may be able to trace them. groups of wires for injectors etc are usually grouped so you should be able to suss out a good bunch of them
hope this helps
Stew
directly off official hondacom MARIS.
doesn't show pinout numbers - but by wire colours may be able to trace them. groups of wires for injectors etc are usually grouped so you should be able to suss out a good bunch of them
hope this helps
Stew
Last edited by AtomMadStew on Sun Jun 21, 2015 8:17 pm, edited 1 time in total.
Re: ECU /relay box wiring diagram
Ecu E plug and C101 engine loom here:
http://www.hondata.com/images/k20awiring.gif
But with the wideband(PRB) all other same on PRA
Now i need some info abot the fuse/relay box from Ariel.
http://www.hondata.com/images/k20awiring.gif
But with the wideband(PRB) all other same on PRA
Now i need some info abot the fuse/relay box from Ariel.
Who is online
Users browsing this forum: No registered users and 1 guest