Hi All.
My Atom is track only and am looking for advice on suitable rims to run Slicks on.
I have 15/16 × 7 rims and want to go wider but seems to be very little choice.
The Atom 4 runs on 16/17 dia rims. Is this viable for Atom 3?
Thanks
Wheel rim choices.
-
- Posts: 16
- Joined: Tue Feb 25, 2020 10:52 pm
- Location: Bromley
- Contact:
Re: Wheel rim choices.
I was running slicks with 15" up front and 17" rears. If you want a wider front's, you can go with 16's upfront but will need to mess around with your wheel arches.
viewtopic.php?f=3&t=18006
viewtopic.php?f=3&t=18006
Re: Wheel rim choices.
Hello,
I have dymag 7" in front (15"), 8" Rear en (16")
I have also a set of Rota slipstream (via skunkwurx), lighter than Team dynamics and Technomagnesio.(that i have too). Heavier than dymag, but really really less expensive.
Both of them have:
slicks Yokohama A005, 190-580-15 front/ 210-580-16 rear or 230-630-16 (better for the too short OEM gear ratio).
Never try 17" on rear.
Cheers
I have dymag 7" in front (15"), 8" Rear en (16")
I have also a set of Rota slipstream (via skunkwurx), lighter than Team dynamics and Technomagnesio.(that i have too). Heavier than dymag, but really really less expensive.
Both of them have:
slicks Yokohama A005, 190-580-15 front/ 210-580-16 rear or 230-630-16 (better for the too short OEM gear ratio).
Never try 17" on rear.
Cheers
Re: Wheel rim choices.
Why never 1inch i have 1 inch and 18 rears and track the hell out of it but my final drive is lower than standard,
Levo,
Levo,
Who is online
Users browsing this forum: No registered users and 2 guests