2012 - Modified (image editing software) Category.
Re: 2012 - Modified (image editing software) Category.
Last edited by NormLarson on Fri Jan 04, 2013 11:04 pm, edited 1 time in total.
Re: 2012 - Modified (image editing software) Category.
I was going to go with a Atomhenge theme for this year, but, I don't like the way it was heading. I am dropping the project. I did get as far as mathematically placing the standing stones in the ring and the lintels on them. It is fairly obvious that I would have to place the fallen stones and the center stuff, ... and the file is just getting too big to be manageable for a laugh.
Re: 2012 - Modified (image editing software) Category.
Norm, I thought I had too much time on my hands...........what on earth are you up too!!!!!!!
Have you had a checkupfromtheneckup recently
Cheers Wattie
Have you had a checkupfromtheneckup recently
Cheers Wattie
Re: 2012 - Modified (image editing software) Category.
It's all part of the Obama give time to business owners program.
Re: 2012 - Modified (image editing software) Category.
I want to know how far this baby goes on that big spring and flywheel propulsion system you've got going on
Re: 2012 - Modified (image editing software) Category.
I proved to myself that the system worked, but, because of binding between shafts I never got a working model. My guess without binding, 6 to 10 feet on concrete. I have left it on Shapeways as a working frame model with no engine. I am playing with the detail printers now and they are very cool. In the next few weeks I am going to print a hub and wheel assembly for the Atom at 1:24 to test some theories and to test material strength
Re: 2012 - Modified (image editing software) Category.
[quote="Norm"]
I proved to myself that the system worked, but, because of binding between shafts I never got a working model. My guess without binding, 6 to 10 feet on concrete. I have left it on Shapeways as a working frame model with no engine. I am playing with the detail printers now and they are very cool. In the next few weeks I am going to print a hub and wheel assembly for the Atom at 1:24 to test some theories and to test material strength
[/quote]
Why am I not surprised.....that I got an answer to my question...... I mean who wouldn't do the calcs..
I proved to myself that the system worked, but, because of binding between shafts I never got a working model. My guess without binding, 6 to 10 feet on concrete. I have left it on Shapeways as a working frame model with no engine. I am playing with the detail printers now and they are very cool. In the next few weeks I am going to print a hub and wheel assembly for the Atom at 1:24 to test some theories and to test material strength
[/quote]
Why am I not surprised.....that I got an answer to my question...... I mean who wouldn't do the calcs..
Re: 2012 - Modified (image editing software) Category.
I didn't do the calc's it was very adult play and completely unsupervised.
Re: 2012 - Modified (image editing software) Category.
No 2012 awards yet
Donnymac and Norm have been waiting to step up for their awards
Cheers Wattie
Donnymac and Norm have been waiting to step up for their awards
Cheers Wattie
Re: 2012 - Modified (image editing software) Category.
Old thread I know, but thought I'd throw it in...
Re: 2012 - Modified (image editing software) Category.
Looks good imo.Surprised this "post a pic" thread died a death.
cheers Wattie
cheers Wattie
Who is online
Users browsing this forum: No registered users and 2 guests