Page 2 of 2
Re: 2012 - Modified (image editing software) Category.
Posted: Fri Jan 04, 2013 11:00 pm
by NormLarson
Re: 2012 - Modified (image editing software) Category.
Posted: Tue Feb 05, 2013 7:32 pm
by NormLarson
I was going to go with a Atomhenge theme for this year, but, I don't like the way it was heading. I am dropping the project. I did get as far as mathematically placing the standing stones in the ring and the lintels on them. It is fairly obvious that I would have to place the fallen stones and the center stuff, ... and the file is just getting too big to be manageable for a laugh.
Re: 2012 - Modified (image editing software) Category.
Posted: Thu Feb 07, 2013 10:55 pm
by wattie
Norm, I thought I had too much time on my hands...........what on earth are you up too!!!!!!!
Have you had a checkupfromtheneckup recently
Cheers Wattie
Re: 2012 - Modified (image editing software) Category.
Posted: Thu Feb 07, 2013 11:38 pm
by NormLarson
It's all part of the Obama give time to business owners program.
Re: 2012 - Modified (image editing software) Category.
Posted: Wed Feb 27, 2013 7:14 pm
by meladdo
I want to know how far this baby goes on that big spring and flywheel propulsion system you've got going on
Re: 2012 - Modified (image editing software) Category.
Posted: Wed Feb 27, 2013 8:58 pm
by NormLarson
I proved to myself that the system worked, but, because of binding between shafts I never got a working model. My guess without binding, 6 to 10 feet on concrete. I have left it on Shapeways as a working frame model with no engine. I am playing with the detail printers now and they are very cool. In the next few weeks I am going to print a hub and wheel assembly for the Atom at 1:24 to test some theories and to test material strength
Re: 2012 - Modified (image editing software) Category.
Posted: Wed Feb 27, 2013 10:16 pm
by meladdo
[quote="Norm"]
I proved to myself that the system worked, but, because of binding between shafts I never got a working model. My guess without binding, 6 to 10 feet on concrete. I have left it on Shapeways as a working frame model with no engine. I am playing with the detail printers now and they are very cool. In the next few weeks I am going to print a hub and wheel assembly for the Atom at 1:24 to test some theories and to test material strength
[/quote]
Why am I not surprised.....that I got an answer to my question......
I mean who wouldn't do the calcs..
Re: 2012 - Modified (image editing software) Category.
Posted: Thu Feb 28, 2013 2:24 am
by NormLarson
I didn't do the calc's it was very adult play and completely unsupervised.
That spring holds a lot of energy!
Re: 2012 - Modified (image editing software) Category.
Posted: Thu Feb 28, 2013 12:06 pm
by meladdo
I didn't do the calc's it was very adult play and completely unsupervised.
Re: 2012 - Modified (image editing software) Category.
Posted: Thu Feb 28, 2013 1:58 pm
by wattie
No 2012 awards yet
Donnymac and Norm have been waiting to step up for their awards
Cheers Wattie
Re: 2012 - Modified (image editing software) Category.
Posted: Fri Jul 29, 2016 12:58 pm
by Kozy
Old thread I know, but thought I'd throw it in...
Re: 2012 - Modified (image editing software) Category.
Posted: Fri Jul 29, 2016 1:13 pm
by wattie
Looks good imo.Surprised this "post a pic" thread died a death.
cheers Wattie
Re: 2012 - Modified (image editing software) Category.
Posted: Mon Sep 04, 2017 10:13 pm
by NormLarson