Hi all, wondering if anyone else had experienced this, when pushing hard on track I’m experiencing hesitation/delay when exiting medium to tight corners, after hitting the apex and back on full throttle it takes a second or so for the acceleration to transfer to motion,
The engine note and induction noise changes immediately on full throttle , the transfer to the wheels and acceleration is delayed, there is no wheel spin/sliding, I’m on Yoko A052 Dymag with Bilstien Adj, there is loads of grip, I’ve got a baffled sump and Quaife lsd , this happens with petrol tank at different levels,
We haven’t go any data logging ability yet from the hondata ecu as dash 2 pro awaiting fitting
Happens on both left and right corners
If I back off it doesn’t do it only if I’m really pushing hard
Running super unleaded k20 na
Any ideas appreciated
Gav
Hard cornering exit hesitation
-
- Posts: 3
- Joined: Thu Mar 25, 2021 4:46 am
- Contact:
Re: Hard cornering exit hesitation
I'm experiencing exactly the same thing and will fit a plated LSD for this reason. I'm running a stock Torsen (which acts the same as your Quaife) and when the inside wheel gets unloaded there is no power going to the outside wheel either.
-
- Posts: 3
- Joined: Thu Mar 25, 2021 4:46 am
- Contact:
Re: Hard cornering exit hesitation
Thanks Paul, that’s really helpful
Who is online
Users browsing this forum: No registered users and 3 guests