The charger came with a suitable length of wire and an in-line fuse, with battery terminal connectors attached.
The first bit of the cable routing was easy, nearer the nose to access the battery not so easy you need to take the plastic nose cone off, but do-able. If your not fussy its dead easy. To do a proper job its a bit fiddly. Or use one of the under bonnet connectors available but you will need to re-terminate the wire to suite the connector Ariel used.
- Dual Waterproof USB charger including cable £9
- 5mm Perspex Black Gloss Acrylic Plastic Sheet 100mm x 100mm £2.50
- Motorbike bolt on phone holder £9
- 3* M6 stainless bolts with washers and nuts (a few quid, although I bought a large box for future use)
A nice little autumn evening DIY job for when the kids have gone to bed.