Page 1 of 1
Wheel Alignment setup
Posted: Thu Oct 04, 2018 11:30 am
by s2kseven
I searched but somehow i didn't see any wheel alignment setup that i was looking for.
If you have a link for TRACK use AND FOR STREET use WHEEL ALIGNMENT SETUP
kindly post it for me. I need an alignment job.
Thank you
Re: Wheel Alignment setup
Posted: Thu Oct 04, 2018 11:57 am
by smokin
Re: Wheel Alignment setup
Posted: Thu Oct 04, 2018 12:48 pm
by s2kseven
Thanks Smokin,
The 1st link is for atom 2, I wonder if the set up can be used for my atom 3?
The rest of the links, I can't see..... "You are not authorised to read this forum"
I guessed its only for paid members?
Re: Wheel Alignment setup
Posted: Thu Oct 04, 2018 1:33 pm
by smokin
For Atom 3 - lifted from one of those threads:
CAMBER
front FACTORY RECOMMENDATION -30'
rear FACTORY RECOMMENDATION -45'
TOE (out) - front FACTORY RECOMMENDATION TOTAL TOE 2mm OUT (= -18' on a 15 inch wheel)
TOE (in) - rear FACTORY RECOMMENDATION TOTAL TOE 3mm IN (=. 25' on a 16 inch wheel)
Not sure why they're inaccessible for you - possibly members only but I'm not admin so can't tell
Re: Wheel Alignment setup
Posted: Thu Oct 04, 2018 2:59 pm
by s2kseven
Thank you again smokin .... Got it !
Re: Wheel Alignment setup
Posted: Thu Nov 15, 2018 7:11 pm
by s2kseven
By the way, I forgot to ask.
Do I need to remove my mudguard and stay bracket when aligning the wheels?
They need to attach the aligning unit to each wheels.
Re: Wheel Alignment setup
Posted: Thu Nov 15, 2018 7:19 pm
by smokin
It may depend on the type of kit they use. I didn't need to remove them when I had mine done but that may not be the case for all systems
Re: Wheel Alignment setup
Posted: Thu Nov 15, 2018 9:26 pm
by Karl V
FWIW, I believe they need the suspension 'loaded' to check / set alignment, so I'd be surprised if they'd want to jack up the car and take the wheels off.
I am constantly surprised though, so don't take my word for it...
