Handbrake piston adjuster tool

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:) ;) :D ;D >:( :( :o 8) ??? ::) :P :-[ :-X :-\ :-* :'( >:D :laugh: ^-^ O0 :angel: :police: :td: :tu: :pop: :doh: :drool: :wize: :H: :rtfm: :fence: :google: :OT: :vroom: :checkeredflag: :embarassed: :faint: :roflp:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

If you wish to attach one or more files enter the details below.

Maximum filesize per attachment: 7 MiB.

Expand view Topic review: Handbrake piston adjuster tool

Re: Handbrake piston adjuster tool

by Curves Junkie » Wed Apr 07, 2021 7:08 pm

That's it [mention]Karl V[/mention] thx and you made my day. ;D :tu:

Re: Handbrake piston adjuster tool

by Karl V » Tue Apr 06, 2021 10:00 am

I've used an adaptor for a socket spanner before - not on an Ariel car though.

Would something like this work?

https://workshopping.co.uk/automotive-s ... 38sq-drive

Re: Handbrake piston adjuster tool

by Curves Junkie » Tue Apr 06, 2021 9:14 am

IanG wrote: ↑Tue Apr 06, 2021 5:26 am You will need something like this a brake rewind tool

https://www.eurocarparts.com/p/am-tech- ... -553991140
[mention]IanG[/mention] thank you for the tip.

However, in order to adjust the brake caliper piston with this tool, I have to remove the brake caliper from the vehicle.
I was hoping that there is a tool where I only have to remove the brake pads and the tool is inserted between the brake disc and the brake caliper to turn the piston.
As long as the pads are still good, it only needs to be turned a few millimetres against the clockwise direction.

Re: Handbrake piston adjuster tool

by IanG » Tue Apr 06, 2021 5:26 am

You will need something like this a brake rewind tool

https://www.eurocarparts.com/p/am-tech- ... -553991140

Handbrake piston adjuster tool

by Curves Junkie » Mon Apr 05, 2021 8:07 pm

The handbrake caliper has a manual brake piston adjuster.

The piston must be adjusted with a tool so that the brake pads fit cleanly.

I am now looking for a tool that I can use to turn the brake piston when it is installed. The tool should be narrow enough to fit between the caliper piston and the brake disc so that I can turn it a few millimetres.
Does anyone have a tip on what this tool looks like or where I can buy it?
Attachments
IMG_5219.jpg
IMG_5219.jpg (1.46 MiB) Viewed 1391 times
IMG_5882.jpg
IMG_5882.jpg (789.68 KiB) Viewed 1391 times
IMG_5879.jpg
IMG_5879.jpg (2.12 MiB) Viewed 1391 times

Top