Ariel.Club Forum

FWIW, I believe they need the suspension 'loaded' to check / set alignment, so I'd be surprised if they'd want to jack up the car and take the wheels off.

I am constantly surprised though, so don't take my word for it...

:D

It may depend on the type of kit they use. I didn't need to remove them when I had mine done but that may not be the case for all systems

By the way, I forgot to ask.
Do I need to remove my mudguard and stay bracket when aligning the wheels?
They need to attach the aligning unit to each wheels.

Thank you again smokin .... Got it !

For Atom 3 - lifted from one of those threads:

CAMBER
front FACTORY RECOMMENDATION -30'
rear FACTORY RECOMMENDATION -45'

TOE (out) - front FACTORY RECOMMENDATION TOTAL TOE 2mm OUT (= -18' on a 15 inch wheel)

TOE (in) - rear FACTORY RECOMMENDATION TOTAL TOE 3mm IN (=. 25' on a 16 inch wheel)

Not sure why they're inaccessible for you - possibly members only but I'm not admin so can't tell

Thanks Smokin,

The 1st link is for atom 2, I wonder if the set up can be used for my atom 3?
The rest of the links, I can't see..... "You are not authorised to read this forum"
I guessed its only for paid members?

https://www.ariel.club/forum/viewtopic.php?f=47&t=17018&p=287909&hilit=toe+camber#p287909
https://www.ariel.club/forum/viewtopic.php?f=4&t=16304&p=278711&hilit=toe+camber#p278711
https://www.ariel.club/forum/viewtopic.php?f=4&t=15623&p=270131&hilit=toe+camber#p270131
https://www.ariel.club/forum/viewtopic.php?f=4&t=212&p=266601&hilit=toe+camber#p266601
https://www.ariel.club/forum/viewtopic.php?f=4&t=14808&p=261560&hilit=toe+camber#p261560
https://www.ariel.club/forum/viewtopic.php?f=4&t=12900&hilit=toe+camber

A few links depending on what vehicle you have

I searched but somehow i didn't see any wheel alignment setup that i was looking for.
If you have a link for TRACK use AND FOR STREET use WHEEL ALIGNMENT SETUP
kindly post it for me. I need an alignment job.

Thank you