OK so it didn't blow the tissue around but I thought maybe I just didn't torque down the header enough......torqued the header bolts a little more and here's the result
it's a marked improvement therefore I think Positron nailed it on the head with the problem.....I felt it seemed strange that this would occur right around my "reinstallation" of the exhaust.
So now to look at the thread with the brammo torques and go use my torque wrench to check them as soon as the header cools down a little more.
Originally they weren't torqued down very tight I guess....it's my tendency not to force things and I guess I should have looked for the torque requirements first.
OK so it didn't blow the tissue around but I thought maybe I just didn't torque down the header enough......torqued the header bolts a little more and here's the result
[url=http://s50.photobucket.com/albums/f343/asilver1234/?action=view¤t=VID2000007.flv][img]http://i50.photobucket.com/albums/f343/asilver1234/th_VID2000007.jpg[/img][/url]
it's a marked improvement therefore I think Positron nailed it on the head with the problem.....I felt it seemed strange that this would occur right around my "reinstallation" of the exhaust.
So now to look at the thread with the brammo torques and go use my torque wrench to check them as soon as the header cools down a little more.
Originally they weren't torqued down very tight I guess....it's my tendency not to force things and I guess I should have looked for the torque requirements first.