Ariel.Club Forum

There about "this" long, and about "this" wide.

It doesn't really matter.  Its not that crucial.  Put some lock washer on a nut and bolt, and you're done.

[quote="bolus"]
How's the fit of that copper gasket?

The exhaust nuts are one time use anyway
[/quote]

The copper gasket is much larger than the outside of the flange, but the interior seems close.
So, it kinda works.

I'm not too concerned about it as I plan on replacing it all soon.

Nick

Does anyone know the specification for the exhaust nuts?  I'd like to order replacements for those at the same time.

Thanks,

- Sagen

How's the fit of that copper gasket?

The exhaust nuts are one time use anyway

I got the copper gaskets and took everything apart.
Which was fun in of itself, as the bolts are so hard to access, and always jam.
I ended up cutting one of them off, and stripping another.

Luckily I had spare bolts.
And nuts.

Other than that, the project took a couple of hours, and I got to take my Dad for a drive.

My mother will be next in a day or two. 

Well, I just hope that the copper gasket lasts a week.

My parents are visiting, and my mother needs to get the ride of her life.


Not that I would ever attempt to scare my mother... 

I believe the reason the gaskets actually blow out is the inner diameter is not 100% perfectly centered when you torque it down, therefore the gasket is in the way of hot gasses and burns up.....if the exhaust was built to better tolerances, this problem would not occur because the gaskets would not be subjected to the exhaust gas so directly.

wow, you blew out a copper gasket?  The exhaust is really too restrictive on these cars

[quote="ebeck"]
The second gasket (copper one) that Bolus has listed doesn't work.  I ordered it and returned it because it didn't fit.   The inside diameter is the correct size, but the outside of the gasket is way too big.   
[/quote]

You can bend down the edges.  It fits for me; however, I have blown out the copper gasket as well. 

-Brad

The second gasket (copper one) that Bolus has listed doesn't work.  I ordered it and returned it because it didn't fit.  The inside diameter is the correct size, but the outside of the gasket is way too big. 

off subject... BAN HIM!!!....

[quote="bolus"]
(search isnt that good here)
[/quote]

There is something you have to understand about search. It ONLY "searches" from where you Currently ARE. Again, if you are in a sub-forum area it ONLY searches that specific area. Want better results? Back out to the top of the forum (click the Home button) then type your search into the box. Simple as that. Try it, you'll see.

(search isnt that good here)

Thanks.

I did search, honest. 

Gaskets listed in the part thread
http://forum.atomclub.com/index.php/topic,6968.0.html

Get the copper ones at Summit
http://store.summitracing.com/partdetai ... toview=sku