by PaulF » Wed Sep 14, 2022 11:25 am
I bought some Ohlins TTX with track springs for my Atom 3. I installed them on the car but could not reach the desired ride heights - pushrods are bottoming out and the car is still 15mm too high.
Took it for a test on a trackday and have issues coming out of corners - inside right wheel lifts, LSD cannot lock and I have no power going to the ground.
Tried changing the height on the dampers but apparently that doesn't work - ride height should be set on the pushrods.
Can anyone give some advice on setup? I never use it on the road so pure track setup. Spring length (unloaded), ride height and corner balancing (cross %) would be a massive help.
Also, I'm running cup wishbones so that might affect things. Think I'll need shorter pushrods.
I bought some Ohlins TTX with track springs for my Atom 3. I installed them on the car but could not reach the desired ride heights - pushrods are bottoming out and the car is still 15mm too high.
Took it for a test on a trackday and have issues coming out of corners - inside right wheel lifts, LSD cannot lock and I have no power going to the ground.
Tried changing the height on the dampers but apparently that doesn't work - ride height should be set on the pushrods.
Can anyone give some advice on setup? I never use it on the road so pure track setup. Spring length (unloaded), ride height and corner balancing (cross %) would be a massive help.
Also, I'm running cup wishbones so that might affect things. Think I'll need shorter pushrods.